nanoMAXX APEX is Bonnet Pro’s triple-strength, zero-water concentrate — a 100% active nano-emulsion cleaner built to replace several single-purpose products on your van with one bottle that works across carpet, upholstery, tile, hard floors, and auto scrubbers. If you’re used to standard encap detergents that are already partially diluted before you even add water, APEX is a different animal: every ounce in the bottle is active chemistry, which means the dilution habits that work for other products don’t carry over directly.
This guide covers what APEX is actually built for, when it makes sense to reach for it, and exactly how to dilute and apply it across the surfaces you’ll run into on a route.
What nanoMAXX APEX Is Built For
nanoMAXX APEX is built to cut down the number of products a tech needs to carry while still handling commercial-grade soil, using nano-emulsion micelle chemistry that penetrates oily and hydrocarbon-based soils faster than conventional detergents. A single quart yields up to 96 RTU gallons on carpet or as a boosting agent, and up to 160 RTU gallons on hard floors or through an auto scrubber — roughly the working power of two cases of a standard product. It also leaves a light natural encapsulation on the fiber that helps resist rapid re-soiling after cleaning, and it’s fully compatible with Surround, LAVA, and Revive iT products if you want to layer it into an existing workflow rather than replace it outright.
It’s also formulated to be genuinely low-hazard: non-ionic, pH 7-8, hypoallergenic, and rated 0 on both the health and flammability scales, which matters if you’re cleaning occupied spaces like schools, healthcare facilities, or offices where clients are sensitive to strong chemical odors or aggressive pH products. It’s safe on wool and other delicate fibers, 100% bio-based, and made in the USA.
When to Reach for nanoMAXX APEX Over Another Product
Reach for nanoMAXX APEX when a job calls for genuine multi-surface flexibility or a lighter environmental footprint than your standard encap detergent — a route that hits carpet, tile, and a few auto interiors in the same day, a sensitive-population facility where odor and hazard rating matter, or a client specifically asking for green chemistry without sacrificing commercial-grade cleaning power. It’s also a strong fit any time you want to consolidate what’s riding in the van, since one concentrate covering carpet, hard floors, spotting, and boosting means fewer bottles to stock, track, and reorder.
How to Use nanoMAXX APEX on Carpet and Upholstery
For carpet and upholstery, mix nanoMAXX APEX at 1 ounce per 1 to 3 gallons of water, depending on soil load — 1:1 for heavier commercial spotting, up to ox into 3gallons for routine maintenance. Load it into a pump-up sprayer or your VLM tank, apply evenly, and agitate with a bonnet or encap pad the same way you would with any low-moisture cleaner. Let it dwell a few minutes on heavier soil before extraction or vacuum pickup.
Dwell Time and Agitation on Heavier Soil
On carpet carrying more than routine foot-traffic soil, give the diluted solution a few minutes of dwell time before agitating, and don’t skip a second light pass on the heaviest traffic lanes. The nano-emulsion chemistry needs a moment to break down oily binders before mechanical agitation finishes the job.
Using nanoMAXX APEX on Tile, Hard Floors, and Auto Scrubbers
For tile, hard floors, and auto scrubber use, dilute nanoMAXX APEX at 0.5 to 1 ounce per 4 gallons of mop water — a lighter ratio than the carpet dilution, since hard floors don’t need the same active-ingredient density to release soil. This same ratio applies whether you’re mopping by hand or running it through an auto scrubber; both yield up to 160 RTU gallons per quart.
Using nanoMAXX APEX for Spotting and Boosting
nanoMAXX APEX can be used directly for spot treatment or added into another prespray or rinse — such as Radical Rinse or OxyALL — to boost cleaning power on tough soils. Start within the 1oz-per-1-to-3-gallon range for spotting, and add it to a booster application incrementally rather than guessing a fixed ratio, adjusting based on the soil you’re facing.
According to OSHA’s Hazard Communication Standard, products are rated on health and flammability hazard scales that determine required labeling and handling precautions. nanoMAXX APEX carries a 0 rating on both, which is part of why it doesn’t require the same PPE considerations as higher-hazard-rated chemistry.
Frequently Asked Questions
What makes nanoMAXX APEX different from a standard encapsulation detergent?
It cleans through nano-emulsion micelle penetration rather than crystallizing polymer encapsulation, and it’s a zero-water, 100% active concentrate rather than a pre-diluted formula, which changes both how it’s diluted and how many surfaces it can be used on.
How much nanoMAXX APEX do I need per gallon of cleaning solution?
For carpet and upholstery, use 1 ounce per 1 to 3 gallons depending on soil load. For hard floors and auto scrubbers, drop to 0.5 to 1 ounce per 4 gallons.
Does nanoMAXX APEX work in an auto scrubber?
Yes — it uses the same dilution range as hard-floor mopping, and a single quart can yield up to 160 RTU gallons of solution at that rate.
Is nanoMAXX APEX safe to use on wool carpet?
Yes, it’s formulated as non-ionic and pH-neutral, which the manufacturer states is safe on all carpet fibers including wool.
Getting the Most Out of Every Quart
Once you know when to reach for it and how to dilute it, nanoMAXX APEX earns its place on the van by replacing several single-purpose products with one that covers carpet, tile, spotting, and boosting. For the chemistry behind why it performs at these dilution rates, see Understanding nanoMAXX Tech.
